470 laboratory sm 6000 series 6000 watts programmable dc supply features ? constant voltage and constant current operation ? parallel operation master/slave ? emc standard en61204-3 ? ce marked ? optional ethernet, rs232, ieee 488 programming ? ieee 488 programming option ? ethernet, rs232 option operating efficiency 87%?91% switching frequency 100khz thermal protection yes programming analogue programming of voltage and current by 0-5v. programming speed see table master/slave operation parallel and series operation with equal current and voltage sharing. in this way two or more sm- units can together be used as one high power unit. voltage and current of the units is controlled by the master (by potentiometers or by programming). series operation up to 600v metering digital meters standard indicators cv/cc mode, ovp triggered leds battery charging the cv/cc regulated power supplies are very suitable for battery charging. ask for the special datasheet ?battery charging with sm-series power supplies?. this datasheet contains information about protective measures against accidental battery reversing. environmental operating temperature -20c to 50c cooling low noise blower, fan speed adapts to temperature of internal heatsink. (from left to right). standards and approvals safety standards en60950 / en61010 emc standards en61204-3, en61000-6-2 emi standards en61000-6-3 (en55022b) mechanical mounting bench or 19" rack mounting specifications input input voltage 342-457vac 3 phase frequency 48hz?62hz inrush current 20a (electronic limit) isolation i/p to o/p: 3750v rms (8mm creepage), i/p ? case: 2500v rms, o/p ? case: 600vdc output output voltage see table. output voltage adjustment 0%?100% output current see table. output current adjustment 0%?100% resolution 0.03% voltage and current control with 10 turn potentiometers. temperature coefficient cv: 35x10 -6 /c, cc: 60x10 -6 /c load regulation 0%?100% load see table line regulation line 10% ? see table ripple & noise see table. stability cv: 5x10 -5 , cc: 10x10 -5 output impedance (0-1khz; 1-100khz) sm15-400: < 0.5m ; < 2.3m sm30-200: < 1.2m ; < 5m sm45-140: < 1.7m ; < 10m sm60-100: < 1.5m ; < 12m sm70-90: < 1.8m ; < 12m sm120-50: < 11m ; < 90m sm300-20: < 34m ; < 330m recovery time (50%?100% load step): 100s; 120s for sm 15-400. remote sense 2v max. per lead compensation.
your dependable power partner ? www.powerbox.com.au 471 laboratory sm 6000 series 6000 watts programmable dc supply model number output voltage (0v to) output current (0a to) ripple & noise cv cc programming speed load reg. 0%?100% cv cc line reg. 200?264vac cv cc sm15-400 15v 400a 8mv pk-pk 300ma pk-pk 3.3ms 2.5mv 24ma 0.2mv 4ma sm30-200 30v 200a 8mv pk-pk 60ma pk-pk 6.4ms 5mv 12ma 0.5mv 2ma sm45-140 45v 140a 10mv pk-pk 25ma pk-pk 2.7ms 5mv 9ma 1mv 1.5ma sm60-100 60v 100a 10mv pk-pk 10ma pk-pk 5.4ms 5mv 6ma 2mv 1ma sm70-90 70v 90a 10mv pk-pk 10ma pk-pk 6.8ms 5mv 5ma 2mv 1ma sm120-50 120v 50a 25mv pk-pk 10ma pk-pk 5.1ms 8mv 3ma 2mv 0.5ma sm300-20 300v 20a 50mv pk-pk 5ma pk-pk 8.5ms 15mv 1.2ma 3mv 0.2ma selection table options screwdriver adjustment - option p001 master / slave operation battery charging sm45-140: p151, sm120-50: p152, sm300-20: p153 increased max. output voltage / current - option p069 enforced secondary isolation 1000v - option p089 high speed programming - sm15-400: p166, sm30-200: p167, sm45-140: p168, sm60-100: p169, sm70-90: p170, sm120-50: p171, sm300-20: p172. built-in iso amp card for isolated analog programming - option p154 built-in ethernet power supply controller - option p157 built-in rs232 power suply controller - option p155 built-in ieee488 power supply controller - option p156 440 and 480 vac input - option p165 technical illustrations
|
